Peugeot Indenor valve cover gasket
This valve cover gasket fits the engines below.
Peugeot Indenor DTP40
Peugeot Indenor DTP50
Peugeot Indenor DTP62
Peugeot Indenor DTP70
With an account you can order faster and you have an overview of your previous orders.
Create an AccountThis valve cover gasket fits the engines below.
Peugeot Indenor DTP40
Peugeot Indenor DTP50
Peugeot Indenor DTP62
Peugeot Indenor DTP70
Included in this package.
1 Fuel filter.
1 Oil filter.
This oil filter fits the engines below.
Peugeot Indenor DTP40
Peugeot Indenor DTP50
Peugeot Indenor DTP62
Peugeot Indenor DTP70
This fuel filter fits the engines listed below.
Peugeot Indenor DTP40
Peugeot Indenor DTP50
Peugeot Indenor DTP62
Peugeot Indenor DTP70
Peugeot Indenor thermostat bend.
Suitable for the Peugeot Indenor and Vetus P4.
Engine factory number.
STM3003 thermostat housing
DGR-116 thermostat bend
Tip: Also order hose clamps 67mm and 48mm with this product.
Mounting…
Impeller Technautic 7410 Johnson 09-801B
Dimensions: Outer Diameter 57.1mm, Width 31.5mm, Shaft 16mm Key.
Original impeller manufacturer number:
Jabsco 4568-0001
Johnson 09-701B
This impeller fits on the following…
The MPM Marine Oil Reversing Clutch is a mineral oil that is extremely suitable for use in reverse gear and steering systems in pleasure craft for which manufacturers prescribe a type of ATF Dexron IID oil.
Meets the requirements…
This feeler gauge is made of high-quality spring steel and is extremely suitable for adjusting valves on engines.
Feeler gauge fingers.
0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40,…
Peugeot Indenor end cap heat exchanger.
Suitable for Peugeot Indenor and Pegeot DTN.
Connections: 70mm and 22mm.
Tip: Also order hose clamps 81mm, 62mm and 32mm with this product.
The MPM Marine Engine Oil SAE 30 is a mineral oil developed for various purposes. Depending on the manufacturer's instructions, this engine oil is used in marine diesel engines, hydraulic systems and lightly loaded gearboxes. It…