CN All in One Converter Box

One giver with two meters :

Any application where you need two meters to display the information of one giver.

For example: a fuel generator with one gauge at the helm and another gauge on the flybridge. Or if you have one gauge at the deck filler cap and the other gauge is on the dash.

Two givers with one meter :

For example, the most obvious use of this setup is when you have double tanks. For example, in an off-road vehicle and you want to see how much fuel / water is still available on one meter.

It also provides a much more accurate way to measure the contents of a tank that is in constant motion. If you have one giver in a long shallow tank (for example, on a RIB) and the tank is leaning backwards or sideways. Then the liquid in the tank flows to one end and thus produces an erroneous reading on the gauge.

By placing two transmitters at opposite ends of the tank and connecting them to the CN All in One Converter Box, the signal is averaged between the two transmitters and gives a much more accurate representation of the actual amount of fuel in the tank.

Converter from 0-190 Ohn to 240-33 Ohm & 240-33 Ohm to 0-190 Ohm

Characteristics :

- Also works with temperature sensors and pressure sensors
- 12VDC / 24VDC
- Works with all CN givers
- Connection is simple - connect the power supply on one side and the encoder(s) and meter(s) on the other side.
- Pre-calibrated - no adjustment required
- high/low alarm