Engine descaler 1 liter
Engine Descaler 1 liter ready to use
Safely removes limescale, calcium, corrosion, and salt deposits from systems cooled with untreated water, without further dilution
Effortlessly dissolves harmful limescale and mineral deposits, ensuring your engine continues to perform optimally
Ready to use, no mixing or measuring required – simply pour and rinse for effortless descaling
Protects gaskets, seals, and rubber impellers during thorough engine cleaning
Ideal for outboard and inboard engines, sterns, and jet skis
Regular use helps prevent costly repairs and extends your engine's lifespan
Achieve the same high-quality descaling results as professional maintenance companies
Keeps your engine running smoothly and prevents breakdowns with regular use
Makes engine maintenance easier so you can spend more time on the water
Instructions for use
Product is ready to use and does not need to be further diluted. 1. Isolate and empty the system to be descaled, and ensure that no raw water can enter the system during the process. Switch off the compressor or cooler to prevent it from running during descaling. Then rinse the system thoroughly with clean water to remove any remaining seawater. 2. Fill the system with the required amount of ready-to-use descaling fluid. Set up a recirculation system with a suitable pump, connecting both the inlet and outlet to a bucket or collection reservoir. If you cannot use a pump, let the fluid soak in the system for 4 to 8 hours. Do not completely seal the system, as gas formation may occur during the process. This overpressure can cause damage. 3. After descaling, drain the fluid completely from the system and dispose of it in accordance with local, regional, or national environmental regulations. 4. Rinse the system thoroughly with clean water to remove all residues of the descaling fluid and reassemble the system. It is recommended to replace all sacrificial anodes at this time. Immersing parts: Parts can also be fully immersed in the liquid for 4 to 8 hours or until the limescale is completely dissolved. Then rinse thoroughly with clean water. *The required amount depends on the system volume.
