Rulge LoPro Man bilge pump automatic 12 volt

Designed to empty the smallest spaces on board.

Rule's LoPro series bilge pumps are only 5.84 cm high.

The LoPro 900S is equipped with 2 automatic functions. The first automatic function is activated when the water reaches a height of 5.08cm(2") or 3.30cm (1.3"), which can be set by the user during installation. The second automatic function is activated every 2.5 minutes by briefly switching the pump on and off. The LoPro 900D works with a traditional float switch and/or switch.

Characteristics:

    Multiple automatic functions (900S)
    High and low water sensor function, pump starts automatically at the preset height.
    Automatic sensor function, pump starts automatically every 2.5 minutes, if there is water, it will continue to pump, otherwise the pump will switch off again.
    Rotatable water outlet connection, the hose connection can be rotated 180° making installation even easier.
    Threaded connection to connect various hose tails, available for the 900 series are: ¾" straight, ¾" angled, 1" and 1?" (all are supplied with the pump)
    Backflow preventer, a new "tricuspid" non-return valve helps prevent water backflow.
    Horizontal or vertical mounting, the 900S offers various mounting options.

Specifications:

    Voltage: 12VDC
    max. capacity is 900GPH (3400LPH) @13.6V
    Consumption: approx. 4A
    Security: TCO
    Height: 5.84cm (2.3")
    Length 900S: 23.62cm (9.3"), Length 900D: 19.30cm (7.6")
    Width: 5.84cm (2.3")